DC Hardwire Ballasts

DC Hardwire Ballasts

12, 24 and 48 Volt d.c. fluorescent electronic ballasts

by Light It Technologies:

These dc ballasts are ideal for converting existing lighting

fixtures such as table, wall, work, shop or ceiling lights to

operate on 12, 24 or 48 volts d.c.

You can also use these to make your own lighting fixtures.

The ballasts are approx. 98% efficient and use only the

power that each tube requires.

These inverter/ballasts have radio frequency interference

suppression.

The wires are tinned for long term use.

Simple to wire and made in the USA.

Operates even in extremely cold temperatures.

Designed to operate a SINGLE fluorescent light per

ballast.

Ballasts for running up to 13 watt tubes.

Model # SH12-13, SH24-13 & SH48-13 ballasts.

With this ballast and the proper socket, you can convert an

existing fixture to use SE & DE compact fluorescent tubes

up to 13 watts.

Input voltage range: 10.5 to 14.5 volts d.c. for the 12 volt model

Input current: 1.1 amps

Dimensions: app. 2" wide by 1-7/8" front to back and 1" high

Available in 12, 24 or 48 volt d.c.

To view our on-line catalogue for hardwire ballasts please

click onto the following link: D.C. Hardwire Ballasts

Ballasts for running up to 32 watt tubes.

Model # SH12 - 18/32 and SH24 - 18/32 ballasts.

This ballast allows you to convert an existing fixture or make a fixture that

uses 18 to 32 watt fluorescent tubes. Will even work with a 40 watt tube but

is best with 18 to 32 watt tubes. Many people use these to convert shop

lighting or fancy ceiling lighting fixtures (like boxed in fluorescent lamps) to

operate from 12 volts d.c.

Input voltage range: 11.5 to 14.5 volts d.c. in the 12 volt model.

Input current: 1.5 to 2.2 amps.

Dimensions: app. 3" long by 1-3/4" front to back and 1-1/4" high.

Available in 12 or 24 volt d.c.

To view our on-line catalogue for hardwire ballasts please

click onto the following link: D.C. Hardwire Ballasts

We also stock sockets for SE and DE/TE tubes.